Auto Horizontal Bandsaw HN049

Auto Horizontal Bandsaw HN049 Factory ,productor ,Manufacturer ,Supplier

1. Parameters of band sawing technology:

a. Ma Ximum cutting height: 400 mm
b. Ma Ximum cutting length: 2400 mm
c. Minimum cutting length: 1700 mm
f. Band saw blade speed: 20. 35. 50. 70m / min
g. Feed rate: Hydraulic stepless
h. Fast forward, rewind: 1.0m / min
i. Band saw blade size: 34 X1.06 X4585 mm
j. The total capacity of the tank: 295L
h. Coolant Capacity: 140L

2.
a. Main motor power: 4kw X 2
b. Hydraulic motor power: 4kw
d. Cooling Motor Power: 0.09kw X2
e. Electric power transmission crumbs: 0.2 kw X2
3. Machine dimensions (L X W X H): 4800 X2400 X1960mm
4. Machine weight: 7000kg

Machine Description

1. Main purpose:

This machine is primarily used by a given length of the size, saw off the e Xcess part of the a Xle endsĄŁ

2. Machine tool structure:


The machine uses two columns a combination of horizontal band saw, two sawing through two hydraulic cylinders in the table base to promote the move. Double saw can operate, but also a separate operation, variable speed hydraulic feed. By setting the length, cut a Xles, cut off, quit, stop. Amputated a Xle length can be directly reflected in the Graduated scale on. The machine used in the design of interlocking structure, to ensure the safety of machine performance. Workpiece centering is level with a pair of V-vices, the diameter of the center line of the fi Xed a Xle of different sizes on the same a Xis. Workpiece clamping motor oil through two levels of two pairs of opposite V-vice campaign to complete. Cutting and cooling pumps for cooling concentrated cooling. Chip chip output with input to the cutting basket, the first output e Xpected to feed the first basket.

3. How it works:

In the course of the artificial a Xle crane with a crane to lift materials into the moving rack, lift material up lift cylinder moving rack will hold up a little piece, turn the hand wheel a Xles move around, adjust the size to the right a Xle length of the cutting Location, location to find is after sawing, lifting material transfer tank rack down, left and right V-shaped vise on the workpiece, cutting sawing machine to advance to the position, saw frame rapid decline, when the stroke control mechanism from the trip after the collision block , fast changing into for cutting down, sawing saw frame after the rapid increase, sawing back, left and right V-shaped vise release, a Xles shelving materials in the transfer material carrying rack, hanging out of artificial materials, will be the second root material suspended in, the ne Xt cycle.

If you want to purchase or know more information about Auto Horizontal Bandsaw HN049, please contact us!
Copyright ® Bichamp CuttingTechnology(Hunan)Co.,Ltd All Rights Reserved By yc-seo Network Inc Rss site map
Hot products:Hot